General • Re: Any solution for admit-only-VLAN-tagged misconfiguration
That's why always have one port off the bridge so you can access device in case of misconfiguration. Do you see your device MAC address in neighbors in winbox ?Yes I saw the MAC address in winbox, but...
View ArticleRouterOS beta • Re: RB5009 Slow Speed 2.5G Bug Report (as requested)
Gahhhh! I have this same problem... So one thing I've noticed is that on a device connected at 1Gbps everything is fine bidirectionally... UNTIL there's some delay added... Add some delay on a linux...
View ArticleWireless Networking • hap ax3 802.11b possible in /wifi/capsman?
Hello,I'm setting up a new hap ax3 in my existing network (RB952Ui-5ac2nD). I would like to setup wifi2.4, wifi5 and wifi6 with the hap ax3. Importance fact: I have devices that requires...
View ArticleScripting • Re: script
Install an OS designed to be scripted from the ground up, then use that to netinstall your routers. One of many possible expressions of this basic philosophy is this article.This is meant as...
View ArticleGeneral • Get Two public IP on the same interface
Hello for all..from your experience can you share how can you get two public IP address on the same interface..?I mean the following :I have ONU device connected to Mirkotik in ether1 interface.in...
View ArticleGeneral • Dual WAN - what setup is recommended?
Hello, i need better understand how to set dual WAN the correct wayCurrently i have most basic setup - pppoe in port 1 made by quick set, router mode + i added 4 wireguards (and firewall rules). ISP1...
View ArticleForwarding Protocols • MPLS TE Paths buggy ros7?
It seems MPLS TE paths have issues in ros7 still?I can create a path from cli, and it works fine, however the path does not display in winbox.Conversely, if I create a path in winbox, it does not...
View ArticleWireless Networking • Re: hap ax3 802.11b possible in /wifi/capsman?
From what I understood: leave it to AX and it should automatically remain backwards compatible down to 802.11b.Statistics: Posted by holvoetn — Fri Apr 26, 2024 5:54 pm
View ArticleGeneral • Re: Dual WAN - what setup is recommended?
sorry not familiar with ipv6 so cannot assist.Statistics: Posted by anav — Fri Apr 26, 2024 5:56 pm
View ArticleGeneral • Re: Get Two public IP on the same interface
config??Statistics: Posted by anav — Fri Apr 26, 2024 5:57 pm
View ArticleSwOS • Re: ports dont link after device reboot
SwOS 2.16 was released and it still seems to have the same problem. Tested on a CRS309-1G-8S+. Only thing I didn't do was removing power to the device after the upgrade to see if that changes...
View ArticleGeneral • Re: simple 3 isp dhcp clients with aggregation
What you are saying makes little sense to me.First off VPN is for remote clients coming in on a particlular WANORVPN is going outbound to a third party provider.So I have no clue about why you would...
View ArticleGeneral • Re: Winbox connection denied through VPN
The input chain should not be open to the internet except for handshaking for a VPN.ONe does not directly acccess winbox aka the router (input chain) for config purposes, instead you make the tunnel...
View ArticleWireless Networking • Re: Cube 60 Pro ac
Hi DenisPDA,Thanks for replying.1) Just another question, the Distance is estimated to be 1km for my 5Ghz link?Physically, distance is suppose to be 50metres.Is this also due to the reservation state...
View ArticleWireless Networking • Re: How to configure WPA3 only not WPA2/WPA3...
I don't know whether to say the "mea culpa" but perhaps it's just a question of interference from one of the two sites and above all of signal limits.First of all I have to apologize to all of you and...
View ArticleScripting • "my script does not work" in v7.10
please help me to make it work i cant make a script so can you modifi this for me to make it work in v7.10 i cant get [/system clock get date]Code: :local dateint do={ :local montharray { "jan",...
View ArticleForwarding Protocols • Re: eBGP v6.x to v7.x migration
Thanks so much for your help, I'll try them as soon as I can.OSPF has also changed, I used this clause which I can't find anymore. Do you have any idea about the alternative?/routing ospf instanceset...
View ArticleAnnouncements • Re: v7.14.3 [stable] is released!
it hAP ac2 in screenshot? doubtsNo, screenshots are from Audience (the other half of setup). @OP never claimed they were from hAP ac2.the old hap-ac2 ran 7.14 with old wireless package which i posted...
View ArticleForwarding Protocols • V6-MPLS Backbone with Cisco BGP Timer and Multicast...
Dear all,We have a mpls backbone in production with OSPF, LDP, MP-BGP, L2VPN/L3VPN and route-reflector on Cisco IOSXE stuff.We want to add some new POPs with Mikrotik routers and we build a lab like...
View ArticleGeneral • Re: ⚠️WARNING: RouterOS v7.10+ will break all scripts based on...
please please please help me to make this script work againCode: :local dateint do={ :local montharray { "jan", "feb", "mar", "apr", "may", "jun", "jul", "aug", "sep", "oct", "nov", "dec" }; :local...
View ArticleGeneral • wireguard vpn client on mikrotik
Could someone share config file of wireguard vpn client installation on mikrotik router? I want to do is to connect LAN client to the VPN server through the router. My wireguard server is installed on...
View ArticleGeneral • When does CAPsMAN actually provision?
I noticed recently that I cannot get slave interfaces to show up by editing the provisioning configuration. Instead, I have to go to each CAP and disable/enable the cap interface to trigger a...
View ArticleScripting • Re: "my script does not work" in v7.10
viewtopic.php?t=196072stop spam on forumthe script is really shitty, this is what you want, but still shitty.Code: :local dateint do={ :local days [ :pick $d 8 10 ]; :local month [ :pick $d 5 7 ];...
View ArticleRouterBOARD hardware • Re: mikrotik mUPS?
it up-converts it to 20V, i've read it elsewhere. which is plenty for a lhg+omnitik setup. is there another similar item from some other vendor? something plug and play with 2 wires for an...
View ArticleBeginner Basics • VPN setup question
Hello everyone,My network is as follow:ROUTER -> MIKROTIK -> NASBasically, I have a NAS physically connected to the Mikrotik, on which a VPN is configured via OVPN.I can successfully connect to...
View ArticleRouterBOARD hardware • RB5009 2.5G performance issues
Hello,I was thinking of purchasing RB5009UG+S+IN to upgrade my home network to 2.5G capability, but I have read some worrying things that there is some issue that could prevent me from utilizing full...
View ArticleGeneral • Re: RouterOS 7 can't edit dynamic object
Thanks for the advise, @Amm0I thought about that already. Will try to figure out something with placing the unneeded(and harmful for my config) hotspot rules below my own manually created. Except that...
View ArticleBeginner Basics • Re: I need so advice on VLANs for devices connecting only...
If just starting out I do personally would stay away from capsman, it adds a layer of additional complexity that should only be tackled when more comfortable with RoS.Yes you can only use one VLAN for...
View ArticleGeneral • Re: wireguard vpn client on mikrotik
create wireguard interface, any port can be chosen. if you are given a private key put in the private key here before generating the interface or hitting applyAdd wireguard interface to WAN interface...
View ArticleWireless Networking • Re: Netbox 5 AX, L11UG-5HaxD wont send data
I need upgrade from netmetal AC to Netbox AX , maybe news about new software resolve problem distance???????Statistics: Posted by wg105 — Fri Apr 26, 2024 9:13 pm
View ArticleGeneral • Help troubleshooting SNMP agent intermittently not working v7.14.2
We could use some help figuring out where to go from here to troubleshoot this issue.So a week or two ago we just got done ensuring all of our several dozen mikrotik site routers got upgraded to...
View ArticleGeneral • PowerBox Pro as a POE Switch
The wire between my 2 out door APs was damaged. I also want to be able to add a PtP link.The POE injector I was using is a 60 watt 56V injector.Took the POE injector and plugged it into the PowerBox...
View ArticleGeneral • Api Mikotik
Hello, I need help from the community. I have a Mikrotik 750, it is factory reset and does not have any firewall programmed. It has API port 8728 enabled. What I need is to communicate with the API...
View ArticleAnnouncements • Re: SwOS Lite version 2.18 released!
Are the missing pings new with 2.18, and fixed by downgrade to 2.17? (warning: can't downgrade lower than 2.17 without losing config because of changed config file format - sadly still not hashing the...
View ArticleBeginner Basics • Route specific sites and one IP Address through PIA VPN
I've been trying to setup the following for days now with the help of several posts on this forum, but I just can't get things working and I am coming to a point that I am lost. I'm trying to achieve...
View ArticleGeneral • Re: This very simple firewall ruleset SHOULD work-- but.....
Duplicate post, already solved viewtopic.php?t=207085Duplicate post, already solved viewtopic.php?t=2070848:43 a.m.Statistics: Posted by erlinden — Fri Apr 26, 2024 10:41 pm
View ArticleGeneral • Help with Scheduled Access Restrictions on MikroTik RB750Gr3
Hi everyone,I'm relatively new to MikroTik and am facing a challenge setting up access restrictions based on specific times and user groups on my RB750Gr3.Network Setup:The network setup includes a...
View ArticleBeginner Basics • carry vlans PTP
Hello all, today i read much but cannot find solution by myself. I have to connect two building with PTP. How can i carry all vlans building 1 to building 2. I also neeed to connect both mikrotik...
View ArticleGeneral • Re: Unable to find wifi radio data after upgrade to 7.14.3
Thanks for your reply.Problem fixed:System > packages > wifi-qcom - disableSystem > packages > wifi-qcom-ac - enable. (I am running AC-device)Reboot at the end as well.It is kind of...
View ArticleBeginner Basics • Re: Vlan for Voice
After a lot of headscratching, I think I've come up with a solution which won't lock you out of your router. If it happens anyway, please excuse me in advance.1. Add SFP WAN and ether8 in the bridge...
View ArticleGeneral • Trouble with multicast over WiFi on RB4011iGS
Hello MikroTik Community,I'm facing a problem with multicasting over Wi-Fi. When I connect the laptop with a wire, everything works fine.Setup:Devices: Raspberry Pi (connected on Ethernet port 4),...
View ArticleScripting • Re: Automating configuration of APs
Bro i want to add username and password for more than one AP in same timeStatistics: Posted by barham123 — Sat Apr 27, 2024 12:25 am
View ArticleWireless Networking • WPA2 EAP Station Mode
I have been trying to set up an HAP AX2 in station mode running RouterOS 7 to connect to a WPA2-Enterprise wireless network using PEAP MSCHAP V2 and I'm having difficulty making a connection. I have...
View ArticleGeneral • Re: No DHCP on Bridge VLAN interface.
Welp, I thought that was working, but it very clearly is not. Only vlan 10 works now and none of the other vlans do. Neither on wired, or as I'm digging in on wireless can I pass traffic. The familiar...
View ArticleForwarding Protocols • Re: Question with BGP
In prolexic we got a 2 byte AS number and established a bgp peer with them if there's an attack they are going to notify you and ask for confirmation since this is a manage service they are going to...
View ArticleWireless Networking • hAP ax² 3 Vlans at internal Atenna
Hi, I try to add 5 Vlans to my hAP ax² and want to use 3 of them with the internal antenna. I am a bit confused using the templates you offer at https://help.mikrotik.com/docs/display/ ......
View ArticleThe Dude • Slow Loading
Hey Everyone, I've got something weird going on. For the last couple of weeks the dude has had a hard time loading. Yes I've checked the license, and I have a P1 license, so that's not the problem....
View ArticleThe User Manager • although the shared user is 4 but just one can join hotspot
hiI have a hotspot on my router that is working well with local users and also working good with usermanager.I`ve got two problems one there are always too many of the same user and same mac address...
View ArticleRouterBOARD hardware • Re: Adding a cooling fan to CRS326
Anyone else find that the enclosure for this case acts like a sound amplifier?I no longer have one of these switches in my attic.Instead they are in living spaces of my home, where the noise profile...
View ArticleGeneral • packet rates (p/s) in raw table
Guys, I'm having DDOS attacks on my network and when it occurs, the packet rates (p/s) are above 7000 for the IPs that are being attacked. I have the contrack table disabled.Would anyone know how to...
View Article
More Pages to Explore .....